/*
    * RtlSdr.hpp
    * Realtek RTL2832U + R820T2 software-defined-radio receiver (RTL-SDR).
    *
    * The RTL2832U is a DVB-T demodulator that, in raw mode, streams 8-bit
    * unsigned I/Q samples over a USB bulk-IN endpoint.  This driver brings up the
    * demodulator + R820T2 tuner, configures the resampler / IF, and feeds the
    * bulk-IN samples into the generic SDR receive subsystem (Drivers::Radio::Sdr),
    * which userspace reaches through the SYS_SDR_* syscalls.
    * Copyright (c) 2026 Daniel Hammer
*/

#pragma once
#include <cstdint>

namespace Drivers::USB::Radio {

    // True if a USB VID:PID identifies a supported RTL2832U-based SDR dongle.
    bool IsRtlSdr(uint16_t vid, uint16_t pid);

    // Called by USB enumeration once the bulk-IN endpoint has been configured.
    // Registers a receiver with the SDR subsystem; the demod/tuner are brought
    // up lazily on first use (in process context, never from the USB poll path).
    void RegisterDevice(uint8_t slotId);

    // Tear down on unplug.
    void UnregisterDevice(uint8_t slotId);

    // -------------------------------------------------------------------------
    // I2C facade used by the R820T2 tuner module.  These carry the tuner's
    // register traffic over the demod's I2C block.  The control-transfer mutex
    // is held by the calling op wrapper, so these do not lock themselves.
    // -------------------------------------------------------------------------
    bool RtlI2cWrite(uint8_t slotId, uint8_t i2cAddr, const uint8_t* buf, uint8_t len);
    bool RtlI2cRead(uint8_t slotId, uint8_t i2cAddr, uint8_t* buf, uint8_t len);

}